Microfiber Synthetic Leather for Safety Shoes Upper

Microfiber Synthetic Leather for Safety Shoes Upper

WINIW Microfiber Synthetic Leather can meet below requirements required by EN ISO20345:2011 standard for safety shoes!

1. Tear strength at least 120N.

2. Water vapour permeability min 0.8mg/(cm2.h).

3. Water vapour coefficient min min 15mg/cm2.

4. Water absorption max 30%.

5. Water penetration max 0.2g.

Category:
  • Description
  • Inquiry

Product Description

Microfiber Synthetic Leather for Safety Shoes Upper!

WINIW microfiber synthetic leather has very good physical & chemical properties, is the best alternative material of leather upper for safety shoes, military shoes,work boots, etc.

 

WINIW Microfiber Synthetic Leather can meet below requirements required by EN ISO20345:2011 standard for safety shoes!

1. Tear strength at least 120N.

2. Water vapour permeability min 0.8mg/(cm2.h).

3. Water vapour coefficient min min 15mg/cm2.

4. Water absorption max 30%.

5. Water penetration max 0.2g.

 

Specification of WINIW Microfiber Synthetic Leather for Safety Shoes Upper:

Thickness: 1.6mm, 1.8mm, 2.0mm, 2.2mm

Width: 1.37m

Color: Black, White, Dark Grey, Customized

Grain: Customized

 

Detail pictures of WINIW Microfiber Synthetic Leather for Safety Shoes Upper:

Microfiber Synthetic Leather for Safety Shoes Upper

 

Microfiber Synthetic Leather for Safety Shoes

 

 

Microfiber Synthetic Leather

 

 

Microfiber Leather for Safety Shoes

Contact Us