जूते के लिए साबर चमड़ा कैसे साफ करें?


जूते के लिए साबर चमड़ा कैसे साफ करें?


प्रस्तावना:

साबर चमड़े shoes have fluff on the surface, जो धूल और गंदगी से चिपकना आसान है, और फीका करना आसान है. फुलाना भी पहनना आसान है, सतह को गंजा बनाना. इसलिये, इस तरह के चमड़े के जूते तेल से रंगे नहीं जाने के लिए सबसे अच्छे हैं, पानी, या कीचड़. साबर को ब्रश करने के लिए हमेशा सूखे ब्रश का उपयोग करें और फुल को साफ और साफ रखने के लिए रंगाई का पानी लगाएं.

How to clean suede leather shoes Suede leather shoes are not only elegant in appearance, but also good in air permeability, comfortable to wear and wear-resistant. But the downside is that it is easy to get dirty and not easy to maintain. Especially in a bad environment, suede shoes are easy to inhale dust and fall down when they encounter water and fluff. इसलिए, how to clean suede shoes? The following methods you may wish to try.

Tools/raw materials to be prepared:

Dishwashing detergent, vinegar, पानी, fatliquor or emulsified oil, steel wire brush or coarse sandpaper

step 1 सफाई:


प्रयोग करना 2 parts detergent, 1 part vinegar, तथा 50 parts water (temperature 30-40°C) to make a cleaning solution. Dip the solution with a shoe brush and carefully scrub the surface of the leather shoes. Be careful not to soak the shoes in the solution when scrubbing, and try not to soak the shoes in too much solution. After the surface of the leather shoes is basically cleaned, scrub the surface of the leather shoes with clean water for 1 को 2 बार, and place the shoes in a cool and ventilated place to dry until semi-dry.

कदम 2 Refueling:

Use a brush to evenly apply leather fatliquor or emulsified oil (available from the tannery, with an oil content of 50-60%) on the suede that has been cleaned and dried to semi-dry. The amount is about per pair of shoes. 100 g. In the process of painting, pay attention to make the oil penetrate into the skin as much as possible. After leaving it for 30 मिनट, brush off the slick oil on the surface of the shoes with water at 35°C, and place the shoes in a cool, ventilated place to dry them.

कदम 3 Finishing:

After the suede shoes are dry, use a steel wire brush or coarse sandpaper to polish the surface to reappear the fluff, and then use a brush to clean it. After the above procedures, the suede leather shoes will be like new shoes.


यदि आप माइक्रोफाइबर चमड़े के बारे में अधिक जानना चाहते हैं, हमारी वेबसाइट: www.MicrofiberLeather.com

WINIW माइक्रोफाइबर चमड़ा-सबसे अच्छा चमड़ा विकल्प सामग्री!

इस घोषणा पत्र को बाँट दो