Microfiber PU Leather for Industrial Safety Shoes and Boots
WINIW Microfiber PU Leather can meet below requirements required by EN ISO20345:2011 standard for safety shoes!
1. Tear strength at least 120N.
2. Water vapour permeability min 0.8mg/(cm2.h).
3. Water vapour coefficient min min 15mg/cm2.
4. Water absorption max 30%.
5. Water penetration max 0.2g.
- විස්තර
- පරීක්ෂණයක්
Microfiber PU Leather for Industrial Safety Shoes and Boots
විනිව් මයික්රෝ ෆයිබර් සම්, with excellent physical and chemical properties, the highest quality artificial leather, ප්රශස්ත වේ සම් ආදේශක for leather upper, can replace leather perfectly for industrial safety shoes and boots.
විනිව් මයික්රෝ ෆයිබර් පී.යූ ලෙදර් can meet below requirements required by EN ISO20345:2011 standard for safety shoes!
1. Tear strength at least 120N.
2. Water vapour permeability min 0.8mg/(cm2.h).
3. Water vapour coefficient min min 15mg/cm2.
4. Water absorption max 30%.
5. Water penetration max 0.2g.
WINIW හි පිරිවිතර Microfiber PU Leather for Safety Shoes:
Ick ණකම: 1.6මි.මී., 1.8මි.මී., 2.0මි.මී., 2.2මි.මී.
පළල: 1.37එම්
වර්ණ: කලු, සුදු, තද අළු, අභිරුචිකරණය කර ඇත
Grain: අභිරුචිකරණය කර ඇත
WINIW හි විස්තරාත්මක පින්තූර Microfiber PU Leather for Industrial Safety Shoes and Boots:
